Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Keypad & Intercom Repair: The Las Vegas Owner’s Guide
Most DoorKing keypad and intercom repairs in Las Vegas run between $185 and $420 installed, depending on whether we’re replacing a single keypad, a full intercom board, or rewiring corroded connections from years of desert heat. We stock DoorKing-compatible keypads and intercom parts on our trucks, and a typical repair takes 45 to 90 minutes once we’re on site. You’ll usually notice the failure the same way everyone does: the gate works fine from the remote or the exit loop, but the keypad stops responding, the intercom sounds like it’s underwater, or your tenant’s entry code stops working on a Monday morning when everyone’s trying to get to work.
Key Takeaways:
- DoorKing keypad and intercom failures are almost always repairable without replacing the entire gate operator.
- Most Las Vegas repairs run $185 to $420 installed, with the exact price written down before we start.
- We stock DoorKing keypads, intercom boards, and common wiring components on our trucks for same-visit fixes.
- Calder Gate Repair is an independent service provider, not affiliated with DoorKing itself.
Which DoorKing Models This Applies To
DoorKing has been making telephone entry and keypad systems for decades, and the good news is that most of their keypad and intercom components carry forward across model series. We regularly work on the DoorKing 1812, 1814, 1815, and 1816 series telephone entry systems, plus the 1503, 1504, 1506, and 1518 gate operator keypads. The DoorKing 1508 and 1601 series also cross-reference with several keypad models. The compatibility gotcha to watch for: DoorKing changed their keypad wiring protocol between the older 1812 Classic and the newer 1812X systems, so a keypad that plugs into one will not talk to the other. If the label on your circuit board is faded or gone, we can identify the right part by the number of pins on the keypad ribbon cable and the shape of the mounting holes. For most homeowners, an OEM DoorKing keypad is the better call because the buttons, backlighting, and housing are built to match the original, but we’ll give you a straight answer on whether a quality aftermarket equivalent makes sense for your specific model.
Styles & brands we work with
Signs Your DoorKing Keypad or Intercom Is Failing
- Keypad lights up but won’t accept codes. This usually points to a failing keypad control chip or a blown relay on the main board. The keypad thinks it’s working, but the signal to open the gate never gets where it needs to go.
- Some buttons work, others don’t. Individual button contacts wear out over time, especially on high-use gates like apartment complexes or busy commercial entrances. The most-used keys (usually 1, 2, and the star or pound key) fail first.
- Intercom audio is crackly, faint, or cut out entirely. In Las Vegas, this is often a wiring issue: our dry heat and occasional monsoon moisture cycles cause connections to expand and contract until they loosen or corrode. Sometimes it’s the handset speaker itself.
- Your call button rings but you can’t hear anyone, or they can’t hear you. This usually means the intercom’s amplifier circuit is degrading. DoorKing intercom boards have a small amplifier that’s a known wear item after 8 to 10 years in the Vegas sun.
- Codes suddenly stop working after a power blink or storm. Power surges from summer monsoon storms can scramble the memory on older DoorKing boards. If reprogramming doesn’t stick, the board’s EEPROM chip is likely failing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s a straight breakdown of what DoorKing keypad and intercom work typically costs in Las Vegas, parts and labor included:
- Single keypad replacement: $185 – $285 installed, depending on model and whether we’re swapping in an OEM or compatible unit.
- Intercom board replacement: $260 – $420 installed, including reprogramming your existing entry codes.
- Wiring or corrosion repair: $120 – $220, which covers tracing the fault, replacing damaged wire runs, and resealing connections against desert heat.
The spread in pricing comes down to the part your specific DoorKing needs and how accessible the wiring is. Before anything starts, we write the total price down and hand it to you. That number is the number on the invoice, full stop. And everything we install carries the 365-Day Done Right Promise: if the repair fails within a year, we come back and fix it at no charge, no pushback, no fine print. Nico Alvarez has been the one walking up to Las Vegas gates for years, and he doesn’t sign off on a job until he’d be happy with it at his own house.
DIY or Call Us?
There’s a safe middle ground here. You can absolutely check a few things before calling: make sure the keypad has power (is the backlight on?), look for loose or exposed wiring near the keypad, and try reprogramming one code to see if it sticks. What you shouldn’t do is open the main control board housing and start probing. DoorKing operators run on 120V line voltage, and the control board carries enough current to give you a serious shock if you touch the wrong terminal. We also see DIY attempts where someone wires a new keypad with the wrong protocol and ends up needing a new board entirely, which costs more than the original repair would have. If the symptoms point to the board or the wiring, that’s a job for a trained gate tech. Tell me what it’s doing – or not doing – and we’ll figure the rest out from there. Call (725) 220-0280 and we’ll get you sorted.
FAQs
A DoorKing keypad in our climate typically lasts 7 to 12 years depending on sun exposure and how many times it gets used each day. Keypads on south-facing gates in full Las Vegas sun tend to degrade faster because the UV breaks down the button membranes and the heat stresses the internal solder joints. Intercom boards often outlast keypads but their amplifiers and relays are the first things to go.
Sometimes, yes. If the issue is loose wiring, a corroded connector, or a failing relay on the main board, we can often repair the existing setup without swapping the keypad itself. But once individual button contacts wear out or the keypad’s internal chip fails, replacement is the honest fix. We’ll tell you which scenario you’re in before any work starts. Call (725) 220-0280 and we’ll diagnose it over the phone.
A standard DoorKing keypad swap takes about 45 minutes once we’re on site. An intercom board replacement with full reprogramming of entry codes runs closer to 90 minutes. Most Las Vegas repairs are done in a single visit because we keep DoorKing keypads and common intercom parts stocked on the truck. We also stock parts for LiftMaster, Mighty Mule, and Ghost Controls systems, so if your gate has a different brand, we’re still equipped to handle it.
We stock the most common DoorKing keypads, intercom boards, and wiring components on our trucks, so we can handle most repairs same-day without you ordering anything. If your gate uses an uncommon or older DoorKing part, we’ll source it locally and schedule your repair as soon as it arrives. Either way, you get a written price before the work starts, and the 365-Day Done Right Promise backs the whole job.
If your DoorKing keypad or intercom is acting up, don’t wait until the gate stops opening entirely. Call Calder Gate Repair Las Vegas at (725) 220-0280. A live person answers 24/7, even at 9 p.m. on a Saturday when your tenants can’t get in. We’ll give you a straight answer on what’s wrong and what it costs to fix, no surprises.
Written by Nico Alvarez, Owner & Lead Gate Technician, Calder Gate Repair Las Vegas at Calder Gate Repair Las Vegas, serving Las Vegas and nearby areas.