Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Las Vegas Homeowners
An electric gate that won’t open at 6 a.m. on a workday, or worse, won’t close at night, is more than an annoyance: it’s a security gap and a daily disruption. Calder Gate Repair Las Vegas has been fixing gate problems across the valley since 2009 as part of the Relay Home Co. family, with Nico Alvarez leading our team of background-checked, uniformed technicians. Most Electric Gate Repair - Las Vegas jobs run between $180 and $340 before parts, and we quote that price in writing before we touch a single bolt. If your gate is stuck, grinding, or refusing to respond, call (725) 220-0280 now. A live person answers around the clock, and we dispatch same-day for repair calls across Las Vegas, Summerlin, Southern Highlands, and every neighborhood in between.
Nevada’s heat and blowing dust are hard on gate hardware. Capacitors cook, solder joints crack, circuit boards warp, and limit switches gum up with fine desert silt. We see these specific failures every week in neighborhoods from Aliante to Whitney, and we also handle Electric Gate Repair in North Las Vegas. When you call, you’re not getting a handyman who dabbles in gates: you’re getting a specialist who knows why your Linear board keeps tripping after a monsoon storm, or why your Viking opener slams the gate instead of slowing it down two feet early. Here’s a quick look at what this page covers:
- What a typical repair costs in Las Vegas, before parts
- The four gate repair services we handle most often
- Warning signs that mean call a pro this week, not next month
- The 365-Day Done Right Promise and what it actually covers
- How our booking-to-invoice process works, step by step
Automatic Gate Repair
Automatic Gate Repair means diagnosing and fixing the failure points in a gate system that opens and closes on its own, whether by remote, keypad, sensor, or phone app. You need it when the gate stops mid-travel, reverses for no reason, whines but doesn’t move, or only works with the manual release. Calder Gate Repair Las Vegas handles automatic gate repair daily, with most jobs in Las Vegas running $180 to $340 for labor before any parts like a new board, receiver, or limit switch. We carry parts for LiftMaster, FAAC, and Mighty Mule trucks stocked for the failures we see most in this climate: UV-brittled wiring, sand-scored gears, and heat-swollen capacitor housings.
Remote and Receiver Diagnostics
The gate motor may be fine while the receiver that listens for your remote has drifted off-frequency or burned out. In Vegas, remotes left in hot cars for two summers often fail before the opener does. We test the signal path first, so you don’t pay for a motor replacement when the real fix is a $40 receiver swap.
Safety Edge and Photo Eye Repair
Automatic gates are required to reverse when something blocks their path, and that safety system is usually the first casualty of dust, sun, and impact. A gate that tries to crush a car, pet, or child is a hazard, not just an inconvenience. We test safety edges and photo eyes on every automatic gate repair job and replace them before we call the gate done.
Styles & brands we work with





Electric Gate Motor
Electric Gate Motor refers to the drive unit itself: the motor that swings or slides the gate leaf, plus the gearbox, capacitor, and control board mounted inside. You know the motor is the problem when the gate hums without moving, blows a fuse repeatedly, or won’t budge even with the manual release disengaged. At Calder Gate Repair Las Vegas, electric gate motor jobs in Las Vegas typically run $180 to $340 for labor, with a replacement motor adding $400 to $900 depending on brand and horsepower. We won’t replace a motor without first confirming it’s actually dead; plenty of “dead” motors turn out to be a bad capacitor or a corroded terminal block that costs a tenth as much to fix.
Capacitor and Board-Level Repair
In Las Vegas heat, the start capacitor inside a gate motor is the single most common failure we replace. It’s a $25 part that kills a gate just as dead as a blown motor, and testing it takes five minutes. We carry replacements on the truck and test the board’s relay outputs before condemning any motor.
Full Motor Replacement, When It’s Actually Needed
When a motor is truly done, spiraling gear wear, burned windings, or water intrusion from a cracked housing being the usual suspects, we quote the replacement by brand and horsepower in writing before ordering anything. Nico Alvarez makes sure every replacement gets a written price, a calendar promise, and the same 365-Day Done Right Promise as any other repair. If the new motor fails within a year, our second visit is free.
Gate Access Control
Gate Access Control is the system that decides who gets in: keypads, intercoms, card readers, vehicle detectors, and the phone or app systems that let you buzz someone through from the couch. You need it repaired when the keypad stops accepting your code, the intercom audio dies, or the gate lets every car through because the loop detector failed. Calder Gate Repair Las Vegas prices gate access control work in Las Vegas at $180 to $340 for the labor on most keypad, intercom, and loop detector repairs, with hardware extras quoted by part. Access control is security work, so we document every change and hand you a digital invoice through The Relay Standard, before-and-after photos included.
Keypad and Intercom Repairs
Vegas sun fades keypad membranes and cooks intercom circuit boards faster than almost anywhere else in the country. If your code only works sometimes, the membrane is usually the culprit. If the audio crackles or dies, the board or speaker has usually failed; both are stocked, both are quotable over the phone.
Loop Detector and Vehicle Sensor Calibration
When a gate won’t open for your car but opens fine for everyone else, the inductive loop buried in the driveway has often failed or drifted out of calibration. Loop detectors are finicky pieces of electronics, and an uncalibrated loop can hold a gate open too long or skip your car entirely. We test, tune, or replace them so the gate recognizes every vehicle that belongs there.
Commercial Gate Operator
Commercial Gate Operator work means repairing or replacing the heavier-duty opener hardware used on apartment complexes, HOAs, business parks, and warehouse entrances across the Las Vegas valley, including Electric Gate Repair - Nellis AFB. These operators cycle hundreds of times a day, unlike a residential opener that might cycle twenty times, so failures happen faster and cost more when ignored. At Calder Gate Repair Las Vegas, commercial gate operator repairs in Las Vegas generally run $180 to $340 in labor, with replacements quoted by brand, duty cycle, and gate weight; commercial jobs often involve a site walkthrough first, which is free. We work on Viking, Linear, BFT, and DoorKing commercial units, and we know which ones survive a Vegas summer better than others.
High-Cycle Duty Upgrades for HOAs and Apartments
Many Vegas apartment gates were installed with a residential-rated operator wearing a commercial sticker, and the result is a gate that eats gears every nine months. We check the duty cycle rating against actual traffic and recommend an upgrade only when the numbers say it’s needed. A gate that cycles 4,000 times a month needs a commercial rating; we’ll show you the math.
Arms, Hinges, and Track Alignment
A commercial gate operator can be healthy while the arm, chain, or track it drives is sagging, seized, or so far out of alignment the motor strains against its own hardware. We inspect the full drive path, not just the box on the post. Fixing alignment early in Las Vegas saves HOAs and property managers from paying for a second operator two years later.
Brands We Service
We know BFT, Linear, Viking, and Ghost Controls units inside and out, and we carry OEM parts for their most common failure points in southern Nevada. BFT’s Italian-made boards are notorious for capacitor failures after a few hard summers, and we keep the right capacitors on the truck. Linear and Viking dominate the commercial swing and slide market in Las Vegas, and our techs can diagnose a Viking’s heat-related limit switch drift or a Linear’s board relay clicking without a service manual.
Ghost Controls is the brand we see most on newer residential swing gates, especially in Summerlin and Southern Highlands. The motors are solid, but their wireless intercom pairing and solar panel wiring get finicky fast in direct desert sun. Whether you have BFT, Linear, Viking, Ghost Controls, or any other make, Calder Gate Repair Las Vegas can quote the repair over the phone and back it with our 365-Day Done Right Promise in writing.
Signs You Need a Pro Right Now
- The gate opens halfway and reverses. This usually means a safety edge or photo eye is detecting a false obstruction, but it can also point to a failing control board sending bad signals. A gate that won’t close leaves your home exposed, and a gate that won’t open traps you or a delivery on the wrong side of it.
- It sounds like a garbage disposal when it moves. Grinding, screeching, or rattling from the motor or track means metal is wearing against metal. Ignored for two weeks in Las Vegas heat, that sound turns a $189 repair into a $700 motor replacement.
- The remote only works from two feet away, if at all. A failing receiver, a dead battery, or an antenna that degraded in UV light all cause this. We diagnose the signal loss in minutes, and most fixes cost less than the service call.
- The gate slams shut instead of slowing down. That’s a limit switch failure, the small sensor that tells the gate when to stop and how fast to get there. A slamming gate can injure someone or crack a vehicle bumper, so treat it as urgent.
- It opens on its own, or won’t respond to anything but the manual release. Random openings usually trace to a shorted loop detector or a failing logic board. No response at all often means the capacitor or motor is dead. Both are jobs for a trained professional, because the high-tension springs and heavy gate panels can cause serious injury if handled incorrectly.
See the difference
Before
After
Before
After
Before
AfterOur Process, Step by Step
- 1
You call, a human answers. When you dial (725) 220-0280, you get a live person, day or night, not a voicemail or a chat bot. We ask what the gate is doing, what brand it is, and when it started misbehaving, then book a window that works for you, with a trackable arrival time sent straight to your phone.
- 2
Your tech arrives and tests before touching anything. We bench-test the motor windings, check capacitor tolerance with a multimeter, read board error codes, and inspect the full drive path: hinges, track, chain, safety edges, and wiring. You’ll see the diagnosis in plain language, not trade jargon.
- 3
A written price comes before any work. Once we know what’s wrong, we hand you a written quote with the exact labor and parts cost. The number you agree to at the door is the number on the invoice. If something changes mid-repair, we stop and talk to you first. That’s not optional; it’s how Calder Gate Repair Las Vegas operates under The Relay Standard.
- 4
We fix it with the right parts and test the full cycle. When you approve the price, we install OEM or appropriately rated parts, adjust travel limits, calibrate safety edges, and run the gate through at least ten full cycles. Before-and-after photos are taken and attached to your digital record.
- 5
You pay from a link and get your guarantee in writing. A digital invoice lands in your inbox, payable from your phone. Attached is your written 365-Day Done Right Promise. If that same repair fails within 365 days, we come back and fix it free, no phone tag, no fine print.
How Much Does Electric Gate Repair Cost in Las Vegas?
A typical electric gate repair in Las Vegas runs $180 to $340 for labor before parts, and that number covers most board swaps, capacitor replacements, limit switch adjustments, receiver repairs, and safety edge replacements. Parts add to the total: a residential circuit board can run $150 to $400, a new motor $400 to $900, and commercial operator parts scale up from there. A full commercial gate operator replacement can land anywhere from $2,000 to $7,000 depending on gate weight, duty cycle, and brand. We quote every one of those prices in writing before any work starts.
What drives the price? Brand parts cost more for European makes like BFT and FAAC than for domestic brands like Linear or Mighty Mule. A gate 40 feet from the street takes longer to diagnose and service than one 10 feet from the curb. Weather damage from a monsoon storm or a summer of 110-degree days can complicate a repair beyond the initial diagnosis. The best way not to overpay is to ask for the diagnosis in writing before approving any repair, and to work with a company that quotes labor and parts separately. Our free estimates include that diagnosis, the line-item quote, and a clear explanation of what’s urgent versus what can wait. Call (725) 220-0280 for your exact quote; the estimate is free and you’ll get the number before we lift a single tool.
Our Service Area Near Las Vegas
Calder Gate Repair Las Vegas serves the entire Las Vegas valley including Summerlin, Southern Highlands, Aliante, Winchester, Sunrise Manor, Paradise, Nellis AFB, Whitney, North Las Vegas, Spring Valley, and Centennial Hills. Most repair calls in the valley get a same-day visit when you call before noon. For our detailed page on Electric Gate Repair in Summerlin, see the coverage and pricing specifics for the western communities. We also keep a dedicated page for Electric Gate Repair in Southern Highlands that covers the most common failures in that area’s newer-build gates. If you’re unsure which team covers your address, our home page has the full service map.
Serving Las Vegas, NV - Our Local Coverage Area
We’re based in the Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Las Vegas
Electric gate repair is the diagnosis and correction of failures in the motor, control board, sensors, safety edges, remote receiver, keypad, or drive hardware that moves an automatic gate. In Las Vegas, the most common culprits are heat-damaged capacitors, UV-brittled wiring, dust-clogged limit switches, and failed loop detectors. Calder Gate Repair Las Vegas handles all of these daily, with written pricing up front and a 365-day written guarantee on every repair. Call (725) 220-0280 for a same-day repair visit.
Most electric gate repairs in Las Vegas take 60 to 120 minutes from diagnosis to tested completion when parts are on the truck. A motor replacement runs two to four hours, depending on the gate’s weight and access. Commercial operator repairs can take half a day if the site walkthrough reveals multiple issues. We’ll give you an honest time window when you call, and we text you a trackable arrival time so you’re not waiting on a four-hour window.
Most repairs run $180 to $340 in labor plus parts. A capacitor swap or limit switch adjustment lands at the lower end; a control board replacement or motor swap lands higher. Commercial jobs are quoted after a free site assessment. Every Calder Gate Repair Las Vegas job gets a written price before work begins, and no price changes at the door. Call (725) 220-0280 for a free, line-item estimate.
We service LiftMaster, Ghost Controls, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule systems, with OEM parts in stock for their most common Las Vegas failures. If your brand isn’t listed, ask us anyway; our techs have worked on nearly every residential and commercial opener sold in the valley. If we can’t fix it, we’ll tell you up front and point you to someone who can, no charge for the honesty.
For repair calls, yes: we dispatch same-day across Las Vegas, Summerlin, Southern Highlands, and the surrounding valley when you call before noon, and we answer live 24/7 for after-hours emergencies. A stuck-open gate at night or a gate that won’t close in monsoon weather is an emergency we’ll take seriously at 2 a.m. Call (725) 220-0280 and describe what’s happening; we’ll tell you honestly whether it can wait or needs a tech now.
The 365-Day Done Right Promise states in writing that if the repair we performed fails within 365 days, Calder Gate Repair returns and fixes it at no charge. This covers the parts and labor for the specific repair we made, and it’s included with every job automatically. It’s not a warranty you have to register for or a discount code you have to remember; it’s our name and Nico Alvarez’s signature on the invoice. If it’s not done right the first time, we make it right the second time free.
Clear any cars, trash bins, or landscaping debris from the gate’s travel path. If you have remotes or keypads, gather them so the tech can test the full access system. Write down any recent error codes or odd behaviors. And know where your gate’s manual release is, though you won’t need to use it: we handle everything from diagnosis to repair, and our tech brings all diagnostic tools and common parts to the truck.
Schedule Your Electric Gate Repair Service in Las Vegas Today
Call (725) 220-0280 now and a live person will answer, day or night. We’ll book your service visit, send a trackable arrival time to your phone, and give you a written price before any repair work begins. Every Calder Gate Repair Las Vegas job comes with the 365-Day Done Right Promise: a free return visit if that repair fails within a year. No obligation, just an honest diagnosis and a fair price.
Written by Nico Alvarez, Owner at Calder Gate Repair Las Vegas, serving Las Vegas since 2009.