Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Opener Repair for Las Vegas Homeowners
A gate opener that grinds, reverses, or simply stops responding usually comes down to a handful of predictable failures: a worn gear, a dead capacitor, a misaligned limit switch, or a control board that’s had enough of the desert heat. Calder Gate Repair Las Vegas fixes all of it. Established in 2009 and led by Nico Alvarez, our team works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers across Las Vegas, Summerlin, Southern Highlands, Aliante, and every neighborhood in between. Most Gate Opener Repair - Las Vegas jobs run $180 to $450 before parts, and we get a uniformed, background-checked technician to your driveway fast, usually same day. Call (725) 220-0280 and a live person answers, 24/7.
Key takeaways: written price before any work starts, 365-Day Done Right Promise on every repair, and a trackable arrival time so you’re not sitting behind a stuck gate wondering when we’ll show.
Gate Operator
A Gate Operator is the motor assembly that physically moves your gate, and in North Las Vegas, the biggest threats to it are heat, dust, and daily cycles that add up faster than most homeowners realize. Calder Gate Repair Las Vegas diagnoses operator failures from the motor down to the capacitor, and most repairs run $220 to $480 before parts. The first thing we check is whether the operator is receiving clean power, because dusty connections and heat-baked capacitors cause more no-start calls in Las Vegas than actual motor failure.
No-Start or Intermittent Operation
When your gate operator does nothing or works sometimes, we trace voltage through the transformer, capacitor, and control board. A dead capacitor is the most common culprit, and it’s a $40 to $90 fix on most brands, not a full operator replacement.
Operator Replacement vs. Repair
If the motor windings are burned or the gearbox is stripped, repairing often costs more than a new operator. We’ll show you both numbers in writing before you decide, and we won’t push a replacement when a capacitor, limit switch, or wiring repair solves it.
Styles & brands we work with
Electric Gate Closers
Electric Gate Closers are the hydraulic or mechanical arms that pull your gate shut after it opens, and they fail slowly at first: the gate drifts, slams, or doesn’t latch completely. Calder Gate Repair Las Vegas adjusts, rebuilds, and replaces closers on swing gates throughout the valley, with most repairs priced between $150 and $320 before parts. A gate that stays open a few inches isn’t a security gate at all, so we treat closer problems as same-day work whenever possible.
Speed Adjustment and Damping
Every closer has adjustment valves that set the swing speed and the soft-close damping. Over time, desert dust and temperature swings make those valves drift. We reset them to factory spec so the gate closes firmly but doesn’t slam, which also extends the life of the hinges and latch.
Leaking or Weak Closers
Hydraulic closers that weep fluid lose closing force, and that means a gate that never quite seals. We replace seals and refill where the cylinder is serviceable, and if the closer is beyond saving, we quote a swap before we touch a bolt.
Gate Servicing
Gate Servicing is the preventive maintenance that catches small problems before they strand you outside in July. Calder Gate Repair Las Vegas offers scheduled service visits that cover the opener, hinge lubrication, limit and safety sensor alignment, and control board diagnostics, typically running $90 to $180 per visit. In Las Vegas, where a gate can cycle 30 times a day and bake in 110-degree heat, most manufacturers recommend service every 6 to 12 months, more often for heavy-use community gates.
What a Service Visit Covers
We inspect and lubricate the chain or belt, test the safety edges and photo eyes, torque all mounting hardware, clean the control board of dust, and run the gate through several full cycles while checking amp draw on the motor. High amp draw tells us the motor is working harder than it should, often months before it fails.
Service Plans for Busy Properties
For gated communities and homeowners with high-traffic gates in neighborhoods like Summerlin and Centennial Hills, we set up recurring service so nothing gets forgotten. The written report from each visit becomes your paper trail for warranty claims and HOA requirements.
Gate Intercom
A Gate Intercom is the call box at the street that lets visitors buzz your house, and when it stops working, delivery drivers can’t reach you and guests start honking. Calder Gate Repair Las Vegas repairs and replaces intercom systems from basic audio units to video and phone-based setups, with most repair work between $130 and $350 before parts. The most common failure we see is corrosion on the wiring inside the call box, which grows worse every time Las Vegas gets one of its rare but heavy rain storms.
Wiring and Handset Issues
Static, one-way audio, or no ring at all usually points to corroded terminals or a damaged underground run. We test continuity from the call box to the handset or phone module and splice or replace only what’s necessary.
Video and Smartphone Integration
If you want to see who’s at the gate from your phone, we install and configure video intercoms that connect over Wi-Fi or cellular. We’ll wire the new system to your existing opener and program the app with you before we leave, so it works before the invoice is sent.
Gate Opener With Keypad
A Gate Opener With Keypad is a keyless entry system that controls the gate opener, and it fails in predictable ways: dead batteries, worn buttons, corroded terminals, or codes that stop being accepted. Calder Gate Repair Las Vegas services and replaces keypads on all major opener brands, with most repairs from $110 to $260 before parts. Whether you need a simple code reset or a full keypad replacement with new programming, we handle it same day in most Las Vegas zip codes.
Programming and Code Management
We program single and multi-user codes, set temporary codes for guests or contractors, and walk you through changing codes from the keypad itself so you can manage access without calling us back. If your keypad accepts some codes and not others, it’s often a worn membrane, not a control board failure.
Weatherproofing and Solar Options
Las Vegas sun eats plastic keypads. We recommend and install weather-rated or solar-powered keypads where exposure is worst, and we seal all connections with heat-shrink and dielectric grease to keep the desert dust out. A $20 seal job prevents a $200 corrosion repair a year later.
Brands We Service
Calder Gate Repair Las Vegas is factory-familiar with nine major brands, but we’re especially deep on four that Las Vegas homeowners see constantly. LiftMaster openers dominate driveway swing gates here, and we stock their most common gears, capacitors, and control boards on our trucks. FAAC hydraulic operators are built for heavy gates, and our techs know their 400 and 750 series well enough to diagnose most issues from a description over the phone.
BFT and Linear are common on newer installations in Summerlin and Southern Highlands, and we keep OEM parts for both rather than substituting universal boards that cause odd behavior months later. Whether you have a Mighty Mule on a lightweight tube gate or a Viking on a commercial-grade slide, we diagnose by brand, not by guesswork. If you’re not sure what’s on your gate, one photo to our tech usually identifies it in minutes.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Gate reverses or reopens by itself. This usually means a safety sensor is misaligned or the force settings are wrong. It’s also a security problem: a gate that reopens invites anyone in. We recalibrate sensors and force limits on the first visit.
- Opener hums but gate doesn’t move. A humming motor with no movement points to a stripped gear or a jammed chain. Running it repeatedly like this burns out the motor, turning a $120 gear replacement into a $400 operator swap.
- Remote works within 10 feet but not from the street. This is usually a failing receiver or antenna, common on older LiftMaster and Linear units. We test signal strength and replace the receiver board or antenna rather than just adding a second remote.
- Gate slams shut or creeps open. On swing gates, this is a closer or hinge problem. On slide gates, it’s often a limit switch – the small sensor that tells the gate when to stop – that’s drifted out of adjustment. Either way, it’s chewing up your opener.
- Burning smell or scorch marks near the motor. That’s a capacitor or transformer overheating, and it’s the most common fire hazard we see on gate openers in Las Vegas. Kill power at the breaker and call us. Don’t run the gate again until a tech has inspected it.
Our Process, Step by Step
- 1
You call or book online, and we answer. A live person picks up 24/7 at (725) 220-0280. We ask what the gate is doing, what brand you have, and when you’re home. You get a live, trackable arrival window, not a four-hour guess.
- 2
We diagnose on site with real data. Our techs test amp draw, capacitor health, sensor alignment, and control board outputs. We photograph what we find and show you the photos, so you’re not taking our word on a repair you can’t see.
- 3
You approve a written price first. Every repair gets a line-item quote before work starts. The number you approve is the number on the invoice. If we find more once we open the housing, we stop and get your okay.
- 4
We fix it and test under load. Repairs are tested through full open-close cycles, with the gate in worst-case position. We check amp draw after the repair and compare it to spec, not to our gut.
- 5
You get a digital invoice and the 365-Day Done Right Promise. Pay from a link on your phone. The invoice includes your repair details and the written guarantee. If the same repair fails within 365 days, we come back free.
How Much Does Gate Opener Repair Cost in Las Vegas?
A typical Gate Opener Repair in Las Vegas runs $180 to $450 before parts, with specific jobs falling into clear bands. Capacitor replacement is $80 to $140. Limit switch replacement runs $90 to $180. Control board replacement, including programming, is $180 to $380. Gear and sprocket replacements are usually $150 to $300. Full operator replacement starts around $650 and goes up based on the opener size and access control features. A Gate Intercom repair is $130 to $350, Gate Servicing is $90 to $180 per visit, and keypad work is $110 to $260.
What drives the price: gate type (slide gates cost more to work on than swing gates), opener brand and part availability, and whether the gate is damaged in ways that affect the repair. How to avoid overpaying: get a written quote before work begins, ask whether the part being replaced is OEM or universal, and avoid any company that quotes a “diagnostic fee” that disappears into the repair. Our free estimate is a real number, not a range, and it includes the diagnostic time, the part, and the labor. No add-ons after the fact.
Our Service Area Near Las Vegas
Calder Gate Repair Las Vegas serves the entire Las Vegas Valley. We’re in Summerlin, Southern Highlands, Aliante, Winchester, Sunrise Manor, Paradise, Nellis AFB, Whitney, North Las Vegas, Spring Valley, and Centennial Hills every day. Most neighborhoods in the central valley get a same-day visit, and outlying areas like the far northwest and far south are next morning at the latest. If your gate is stuck open, we treat it as an emergency and dispatch immediately. You can also learn about our work in Gate Opener Repair in Summerlin or Gate Opener Repair in Southern Highlands.
Serving Las Vegas, NV - Our Local Coverage Area
We’re based in the Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Opener Repair in Las Vegas
Gate Opener Repair is the process of diagnosing and fixing the motor, gears, control board, sensors, and wiring that make an automatic gate open and close. It can be as simple as replacing a burnt capacitor or as involved as swapping a stripped gear or failed motor. Calder Gate Repair Las Vegas repairs all nine major opener brands, including Gate Opener Repair - Nellis AFB properties, and every job starts with a written diagnosis and quote before any work begins.
Most repairs are completed in one visit, typically 60 to 90 minutes. Replacing a capacitor, limit switch, or keypad is often a 30 to 45 minute job. If a control board or full operator needs replacement, we may need to order a part, which adds 2 to 5 business days depending on the brand and local part availability.
Most gate opener repairs in Las Vegas run $180 to $450 before parts. Specific jobs like a capacitor replacement cost $80 to $140, a control board replacement is $180 to $380, and a full operator replacement starts around $650. You’ll always receive a written line-item price before we start work, so the number never surprises you at the end. Call (725) 220-0280 for a free estimate.
Yes, we service and repair LiftMaster gate openers every day. LiftMaster is one of the most common brands in Las Vegas driveways, and our trucks carry the most frequently needed LiftMaster parts, including capacitors, gear and sprocket kits, and control boards. We also service FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers.
Yes. A gate stuck open is a security risk, so we treat those calls as priorities and dispatch a technician as soon as possible, any hour, any day, 24/7. A live person always answers at (725) 220-0280. If your gate is stuck closed and you need to get out, call us right away.
Every repair includes the 365-Day Done Right Promise. If the same repair fails within 365 days, Calder Gate Repair returns and fixes it at no charge. The promise is written on every invoice, and there’s no fine print around which parts are covered and which aren’t: if we repaired it, it’s covered for a full year.
Clear a path to the gate, have your gate opener remote handy for testing, and if you have a keypad or intercom, note any error codes or odd behaviors you’ve seen. If the gate has power, don’t switch anything off. If you see smoke, smell burning, or hear grinding, cut power at the breaker and leave it off until our tech arrives.
Schedule Your Gate Opener Repair Service in Las Vegas Today
Don’t let a failing gate opener leave you stuck outside or, worse, leave your property unsecured. Call Calder Gate Repair Las Vegas at (725) 220-0280 for a free, no-obligation estimate. A live person answers 24/7, and our technician arrives with a trackable arrival time, a written price in hand, and the parts to fix most jobs on the spot. That’s the Relay Standard: transparency from the first call to the final invoice. Get your gate working right today.
Written by Nico Alvarez, Owner at Calder Gate Repair Las Vegas, serving Las Vegas since 2009.