Electric Gate Repair in Sunrise Manor - Same-Day Repair, Priced Before We Start

Fast, Reliable Electric Gate Repair Across Sunrise Manor

Electric gate repair in Sunrise Manor usually runs between $180 and $420 for common opener and sensor issues, and most jobs are completed the same day our van reaches your driveway. That number covers diagnostics, labor, and the small parts that fail most often. Bigger jobs, like replacing a sun-baked swing gate post or retrofitting an obsolete operator, land in the $650 to $1,400 range depending on what needs to come out and what’s going back in. Call us at (725) 220-0280 and you’ll get a written price before any work begins, not after.

Call (725) 220-0280

Sunrise Manor keeps us busy for a reason. The east side’s older gates, especially the ornamental iron and chain-link work from the 1960s and 1970s, weren’t built for 110-degree summers and the monsoon dust that blows through every July and August. We know the difference between a gate that needs a minor adjustment and one that’s been slowly failing for years. When you call Calder Gate Repair, you’ll speak to a live person who can book your visit, tell you when the technician will arrive, and explain what to expect before anyone turns a bolt.

Key Takeaways

• Most electric gate repairs in Sunrise Manor cost $180 – $420 before major parts.
• Same-day service is standard for opener, keypad, and safety sensor failures.
• Every repair carries a written price, a written guarantee, and a 365-Day Done Right Promise.
• We service LiftMaster, FAAC, Mighty Mule, BFT, and every major brand found on Sunrise Manor gates.
• Call (725) 220-0280 any hour, day or night, and a live person answers.

Why Calder Gate Repair Las Vegas Is Sunrise Manor’s Preferred Electric Gate Repair Company

Calder Gate Repair is part of the Relay Home Co. family, which has been operating since 2009. We’re not a franchise call center that sends whoever’s available. We’re a dedicated Electric Gate Repair team that specializes in gate openers, control boards, safety sensors, and the mechanical problems that come with gates that have been hanging on Sunrise Manor properties for 40 or 50 years. Every technician who pulls up to your home is background-checked, uniformed, and working from a dispatch system that gives you a live arrival time you can track on your phone.

Sunrise Manor homeowners call us because we answer the phone at 2 a.m. the same way we answer at 2 p.m. A real human, every time. No voicemail trees, no chat bots. We book the appointment, send you the technician’s ETA, and after the job is done you’ll receive before-and-after photos and a digital invoice you can pay from a link. That’s The Relay Standard. It’s how every Calder Gate Repair job works, whether we’re replacing a control board near Hollywood Boulevard or fixing a stuck slide gate near Charleston Boulevard.

Nico Alvarez leads our team, and he’s firm about one thing: the price on the written estimate is the price on the invoice. If a Sunrise Manor gate repair requires a part we didn’t spot on the first visit, we stop, call you, and get your approval before we order it. You’ll never get a bill that’s higher than what you agreed to at the door.

Commercial Gate Operator in Sunrise Manor

Commercial gate operator work in Sunrise Manor covers the heavy-duty motors, arms, and control systems on gates at apartment complexes, HOA entrances, and small business lots along Nellis Boulevard and Lake Mead Boulevard. Most commercial gate repairs in the area run $420 to $980 for diagnostics, labor, and standard operator parts like limit switches, capacitors, or loop detector repairs. A full operator replacement, when the existing unit is undersized or worn beyond repair, typically lands between $1,600 and $3,200 installed.

Operator Control Board Replacement

When a Sunrise Manor commercial gate stops responding to remotes, keypads, or the vehicle loop, the control board is usually the first suspect. Many of the boards still running on older local properties are factory-discontinued, which means we source compatible replacements or retrofit a modern board that talks to the existing motor. We test the whole system before we leave: open, close, stop, safety reverse, and the photocell loop.

Slide Gate Motor Repairs

Commercial slide gates across Sunrise Manor take a beating from wind-blown dust. When the track clogs, the motor works harder, the rack and pinion wear faster, and the limit switch knocks itself out of adjustment. We clean the track, correct the gate alignment, and replace the worn drive components so the gate stops jamming halfway across the opening.

Automatic Gate Repair in Sunrise Manor

Automatic gate repair in Sunrise Manor focuses on the residential swing and slide gate systems on the area’s single-family homes, especially the older properties built between the 1960s and 1980s. Standard automatic gate repairs run $180 to $420, covering the most common failures: misaligned safety sensors, failed limit switches, remote receiver issues, and keypad reprogramming. When the gate itself has sagged or the operator needs full replacement, the job typically falls between $650 and $1,400.

Swing Gate Hinge and Post Repair

A Sunrise Manor swing gate that scrapes the driveway is almost never just an adjustment problem. On older gates, the hinge post has often corroded inside its concrete footing, especially on south-facing lots where thermal cycling loosens the epoxy anchor over time. We’ll tell you honestly whether a new post footing and hinge repair makes sense, or whether the gate itself has warped to the point where patching it is throwing good money after bad.

Safety Sensor Replacement

Automatic gates built before the early 2000s often lack modern entrapment protection, which means they don’t stop or reverse when something crosses their path. That’s a serious safety issue, and it’s also a code compliance issue if you ever sell the home. We retrofit older Sunrise Manor gates with current photocells and edge sensors, then test the reverse function repeatedly before we sign off on the job.

Trusted Brands We Service in Sunrise Manor

Our technicians are factory-familiar with nine major gate opener brands, including LiftMaster, FAAC, Mighty Mule, and BFT. That matters because a LiftMaster control board and a FAAC hydraulic arm behave differently under the same Sunrise Manor heat load. We keep common replacement parts stocked for the brands most often installed in this part of the valley, which means many repairs get done in a single visit instead of two. If you’ve got an operator that another company said was “too old to fix,” call us first. We’ve retrofitted plenty of obsolete boards that were still perfectly good behind a failed capacitor.

Common Electric Gate Repair Problems We See in Sunrise Manor Homes

• Warped swing gate panels: Summer temperatures over 110°F make steel and ornamental iron expand, and gates on unshaded south-facing lots take the worst of it. We see hinge posts leaning, gates dragging on the concrete, and weld points cracking from the repeated stress.
• Solar operator failures on south-facing lots: Many 1970s Sunrise Manor gates were fitted with solar-powered openers years ago, and the panels crack under intense UV. Once the panel goes, the battery stops charging and the operator dies within days.
• Dust-clogged slide gate tracks: Monsoon season pushes fine dust into every gap, and slide gate tracks along Sunrise Manor’s east side fill up fast. The result is rack and pinion wear, loop detector faults, and motors overheating while they try to move a gate that’s grinding through dirt.
• Obsolete control boards: Gates installed in the 1980s and 1990s often run control boards that are no longer manufactured. When a relay fails, the gate either stops mid-travel or starts cycling on its own. We carry compatible retrofit boards for most legacy systems.

One job that sticks with us: a call to a home off Lamb Boulevard where a 1970s ornamental iron swing gate had sagged until it dragged on the concrete. The hinge post had corroded inside its footing, and the original LiftMaster operator’s control board was obsolete. We poured a new post footing, replaced the hinge post, and retrofitted the gate with a modern FAAC operator and safety photocells. The total came in at less than half the cost of a full gate replacement, and that gate’s been swinging clean for over a year.

Pricing for Electric Gate Repair in Sunrise Manor, NV

We Also Serve Cities Near Sunrise Manor

While this page focuses on Electric Gate Repair in Sunrise Manor, our technicians also run calls to Las Vegas, Summerlin, Southern Highlands, and Aliante throughout the week. If you’re just outside the Sunrise Manor boundary, call us anyway. We’ll tell you straight whether we can get a truck to you that day.

FAQs About Electric Gate Repair in Sunrise Manor

Schedule Your Electric Gate Repair in Sunrise Manor Today

If your gate is sagging, stuck, or dead, call (725) 220-0280 now. A live person answers 24 hours a day, every day, and we’ll get a background-checked technician to your Sunrise Manor home with a real arrival time you can track. You’ll get a written price before any work starts, a written guarantee on every repair, and a free second visit if anything goes wrong within 365 days. That’s the 365-Day Done Right Promise, and it’s in writing on every job we do.

Written by Nico Alvarez, Owner at Calder Gate Repair Las Vegas, serving Sunrise Manor and the surrounding valley.