Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Aliante, NV
Aliante homeowners call us most often for two things: a driveway gate that won’t open, and a gate opener that stopped responding after months of direct desert sun. Most gate repairs in Aliante run between $180 and $620, depending on whether we’re replacing a hinge, rewiring a control board, or swapping out the opener itself. Calder Gate Repair is the gate specialist inside the Relay Home Co. family, and every Aliante job starts with a written price before any work begins. Call (725) 220-0280 and a live person answers, day or night.
Why Aliante Homes Are Different
Aliante’s master-planned communities were built mostly in the 2000s, and the housing stock shows it. Decorative steel and wrought iron driveway gates are everywhere, and they’ve now been baking in the Mojave sun for 15 to 20 years. That means we see problems here that older Las Vegas neighborhoods don’t deal with as often: metal gates that have warped enough to scrape the ground, hinges that bind after years of expansion and contraction, and rust that sneaks in after monsoonal rains hit non-galvanized components.
The summer heat in Aliante routinely pushes past 100°F for weeks at a time. Metal gates expand, paint fails, and circuit boards inside gate opener control boxes overheat and die young. We regularly recommend moving opener control boxes to shaded walls or adding sun shields in Aliante, because operators mounted in direct afternoon sun fail years earlier than they should. If your gate groans in July but swings fine in January, heat expansion is usually the cause.
Styles & brands we work with
Our Main Aliante Services
Aliante homeowners call us most about two categories: mechanical gate problems (hinges, wheels, sagging frames, rust) and electrical or opener problems (motors, circuit boards, sensors, remotes). Each has its own dedicated Aliante page below.
Gate Repair in Aliante
This covers the gate itself: steel and wrought iron frames, hinges, wheels, tracks, and posts. In Aliante we fix a lot of warped gates that no longer close squarely, and we replace rusted hinge bolts before they snap and drop the gate. Sun exposure and occasional monsoon rust make these structural repairs more common here than in older neighborhoods. Gate Repair in Aliante covers what we fix and what it costs.
Electric Gate Repair in Aliante
When the problem is electrical (sensors, wiring, photocells, keypads, or the motor itself), this is the page. Aliante’s heat shortens the life of exposed wiring and plastic sensor housings, and we carry replacement parts on the truck for most jobs. Electric Gate Repair in Aliante explains common failures and pricing.
Gate Opener Repair in Aliante
The opener is the brain and muscle: the control board, the receiver, the arm, and the remote system. In Aliante we replace a disproportionate number of circuit boards that cooked in direct sun. Gate Opener Repair in Aliante covers the brands we service and what a typical opener fix runs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aliante
Our technicians work on LiftMaster, FAAC, Elite, and Mighty Mule openers most weeks in Aliante, along with five other major brands. We stock common parts locally for these systems, which keeps most repairs to a single visit. See our brands for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Aliante, NV
These are the ranges we quote most often in Aliante. Your written quote comes before any work starts, and the number on that quote is the number on your invoice.
| Service | Typical range in Aliante |
|---|---|
| Gate opener repair (labor only) | $110 – $280 |
| Gate opener replacement (parts included) | $450 – $1,200 |
| Control board replacement | $180 – $450 |
| Limit switch replacement | $90 – $210 |
| Gate hinge replacement (per hinge) | $45 – $150 |
| Gate wheel or roller replacement | $60 – $180 |
| Welded gate frame repair | $150 – $500 |
| Photocell sensor replacement | $80 – $190 |
| Remote and receiver programming | $50 – $140 |
| Full diagnostic visit | $45 – $95 |
What pushes a price toward the high end in Aliante is usually rust damage on older wrought iron gates and heat-damaged circuit boards that need full replacement rather than a simple repair. Whatever the number, you approve it in writing before we touch a single bolt.
Neighborhoods We Serve in Aliante
We cover Aliante’s master-planned communities from the 215 Beltway up to the northern edge of the neighborhood. Most jobs are within 20 to 30 minutes of our dispatch point, which means same-day service is realistic for most repairs.
- Aliante Master Plan
- Club Aliante
- Sun City Aliante
- North Aliante
- Deer Springs area
Service Area – Cities Near Aliante
While this page is focused on Aliante, our crews also serve nearby areas across the Las Vegas Valley. If you’re in a neighboring community, you’ll find dedicated pages for Las Vegas, NV, Summerlin, NV, Southern Highlands, NV, and Winchester, NV. Same written-price-before-work promise applies everywhere we go.
Serving Aliante, NV - Our Local Coverage Area
We’re based in the Aliante area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aliante
Most Aliante calls get a same-day visit, and we give you a live, trackable arrival time when you book, not a four-hour window. Emergency repair calls are answered by a real person 24/7, and a technician can usually be on site within a few hours. Call (725) 220-0280 for today’s availability.
Sometimes yes. If you live in an Aliante HOA, gate color, material, and style changes may need approval, but repairs that match the existing gate typically don’t. We can tell you what your HOA requires, and the written quote we provide is usually enough documentation for an HOA to sign off. When in doubt, check your community guidelines before scheduling.
Everything is booked through a live person on the phone: you get a firm arrival time you can track, and our technician arrives in uniform with ID. After the job, you get a digital invoice you pay from a link. If the repair fails within 365 days, Calder returns at no charge under the 365-Day Done Right Promise. Call (725) 220-0280 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aliante Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.