Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
Gate repair in Whitney usually runs between $150 and $600 depending on whether we’re fixing a sagging hinge, replacing a cracked gear rack, or retrofitting an old operator with modern safety sensors. Most jobs are done same day or next morning. If your gate is stuck open, standing half-closed, or grinding against its track, call Calder Gate Repair at (725) 220-0280 and we’ll give you a written price before a single bolt gets turned.
Whitney isn’t Las Vegas, and the gates out here prove it. We work on 1970s swing gates hung on 4×4 posts that have been soaking up monsoon rain for forty years, and we work on new automatic gates in built-to-rent subdivisions that were installed last year. The soil, the sun, and the county codes are all a little different here, and that changes what a proper repair should include.
Key Takeaways
- Most Whitney gate repairs cost $150 – $600, quoted in writing before work starts.
- Older sliding gates with plastic rack gears are the most common failure we see, especially on 1980s homes with wide RV openings.
- Whitney’s unincorporated Clark County status means setbacks and gate heights follow county code, not City of Las Vegas rules.
- Every repair includes a 365-day written guarantee and a free return visit if it fails.
Styles & brands we work with
Why Calder Gate Repair Las Vegas Is Whitney’s Preferred Gate Repair Company
We’re part of the Relay Home Co. family, founded in 2009, and our gate division exists specifically because gate openers fail in ways garage doors don’t. Whitney customers call us when a swing gate has dropped three inches and drags across the concrete, or when an old LiftMaster operator just hums and won’t move. We dispatch technicians who know the difference between a control board problem and a limit switch problem without guessing.
Every technician arrives in uniform, background-checked, and with a live arrival time you can track on your phone. You’ll know who’s coming and exactly when. Nico Alvarez leads our Las Vegas crew, and the standard he set is simple: a written price before work begins, a written guarantee on every repair, and a free second visit if the repair fails within 365 days. That’s the 365-Day Done Right Promise, and it’s on every invoice we write in Whitney.
We answer the phone live 24/7. Not a call center, not a chatbot. A person who can book your appointment, check on your technician, or talk you through whether you can safely leave the gate open overnight. For Whitney’s older homes especially, we’d rather you call before forcing a bent gate back on its track and turning a $200 hinge repair into a $900 operator replacement.
Metal Gate Repair in Whitney
Metal gate repair in Whitney typically runs $180 – $450, and it’s the most common service we do out here because steel gates and the desert sun don’t always get along. The work involves welding cracks, replacing rusted hinges, cutting out rotted bottom rails, and sometimes reinforcing the frame where a heavy gate has been hanging for decades on weak welds. Whitney’s intense UV exposure degrades paint and powder coating faster than most homeowners expect, which exposes bare steel, which rusts.
Rusted Hinges and Sagging Panels
Older steel gates on Whitney’s semi-rural lots often sag because the hinge side wasn’t built for the weight. We cut off the old hinges, weld on new adjustable ones, and realign the gate so it clears the latch post without lifting the whole frame. If the bottom rail has rotted through from accumulated dirt and moisture, we replace that section and repaint to match.
Track and Roller Repairs for Sliding Gates
Sliding metal gates on Whitney’s wider lots drag when the v-track wheels wear flat or the track itself shifts in the soil. We replace nylon rollers, reset the track, and adjust the operator’s force settings so the gate doesn’t strain a motor that’s already fifteen years old. The goal is getting it moving like it did the year it was installed, not just getting it moving.
Wood Gate Repair in Whitney
Wood gate repair in Whitney usually runs $220 – $520, and the big variable is always the hinge posts. Gates on the older east side of Whitney were commonly hung on 4×4 posts set directly in soil, and after decades of monsoon saturation and drying, those posts lean. The gate still looks fine. The post doesn’t. We reset the post in concrete, install adjustable hinges, and often sleeve the post with steel to prevent the same lean from returning in five years.
Post Replacement and Gate Realignment
When a post has rotted below grade, no hinge adjustment will save it. We pull the old post, pour a proper concrete footing, and set a new treated or steel post before re-hanging the gate. Most of the Whitney wood gates we repair also get a diagonal brace added if the original builder skipped it, because an unbraced gate will keep drooping no matter how tight the hinges are.
Warped Panels and Monsoon Swelling
Whitney’s monsoon season doesn’t last long, but it hits fast. Wooden gates soak up that humidity, swell, and bind against the latch post. Sometimes we can plane and re-seal the panel. Sometimes the panel is too far gone and replacement is cheaper than repeated repairs. We’ll tell you which one applies to your gate before we start, with a number attached.
Our crew once replaced a warped wooden swing gate on a 1970s home in Whitney’s older east side. The original 4×4 hinge posts had rotted and leaned after monsoon seasons. We set new steel posts in concrete footings, installed an adjustable hinge system, and retrofitted a LiftMaster gate operator with new safety photocells. The gate now clears the driveway without binding and meets UL 325 entrapment standards.
Trusted Brands We Service in Whitney
We’re factory-familiar with nine major gate opener brands, and in Whitney we mostly see LiftMaster, Mighty Mule, and Elite on residential gates. FAAC and BFT show up on the nicer custom iron gates, and we service those too. Because we stock common parts locally, a Whitney customer with a dead Mighty Mule control board isn’t waiting a week for shipping. We swap it same day when it’s in stock, and we tell you honestly when a part is no longer manufactured and a new operator is the smarter buy.
Common Gate Repair Problems We See in Whitney Homes
- Cracked plastic rack and pinion gears on 1980s sliding gates. UV exposure turns the plastic brittle, and a gate that stalls mid-travel is usually running over a cracked rack section. We replace the rack and set the operator limits so the gate doesn’t overdrive the new gear.
- Monsoon drainage undermining post footings. Whitney’s semi-rural lots are mostly clay-heavy soil. Water pools around posts, footings settle, and swing gates drop half an inch a season until they bind hard against the latch. Fixing the post before it needs replacement is always cheaper.
- Older operators without modern safety photocells. 1970s and 1980s gate openers in Whitney often have no entrapment sensors at all. If a child or pet crosses while the gate is closing, it reverses unpredictably. We retrofit UL 325-compliant photocells and edges on the operator you already own.
- Gate operators tripping the safety reversal but not closing. In Whitney, this is usually a misaligned photo eye or a loop detector with a shifted field in the clay soil. We re-aim the sensors, re-cut the loop if needed, and verify the force settings against the gate’s actual weight.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Whitney, NV
Here’s what Whitney homeowners actually pay, based on the work we do most often in this area.
- Gate tune-up and hinge adjustment: $150 – $250
- Metal gate hinge replacement and realignment: $180 – $350
- Wood gate post replacement: $280 – $520
- Sliding gate rack and pinion gear replacement: $220 – $450
- Gate opener control board replacement: $250 – $550, depending on brand
- Full operator replacement (LiftMaster, Mighty Mule, Elite): $600 – $1,000 installed
Every one of those numbers is a real range, and we write the final price down before any work starts. The invoice matches the quote. Always has. Call (725) 220-0280 for a free estimate, and we’ll give you the number for your specific gate before you spend a dollar.
We Serve All of Whitney
We work everywhere in Whitney, from the older east side neighborhoods near Boulder Highway to the newer built-to-rent communities west of Nellis. The semi-rural lots along Russell Road and the wider driveways off Sunset Road are familiar ground for our crews. No part of Whitney is too far out, and we don’t charge extra for being in unincorporated Clark County. Schedule through our Gate Repair team and we’ll send a technician who knows the area.
We Also Serve Cities Near Whitney
While this page is written for Whitney residents, our crews also cover Las Vegas, Summerlin, Southern Highlands, and Aliante. If you’re just outside Whitney and need gate work, we’ll bring the same written pricing and the same 365-Day Done Right Promise. Learn more about our work across the area on our Gate Repair in Whitney page, or call us directly at (725) 220-0280.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Whitney
Swing gates in Whitney lean after monsoons because the area’s clay-heavy soil expands when saturated and then contracts as it dries, loosening post footings that weren’t set deep or wide enough originally. Add in 1970s-era 4×4 posts set directly in the ground, and you get a gate that drops and binds every year. The fix is resetting the post in concrete, using steel or properly treated wood, and installing adjustable hinges so minor settling doesn’t drag the gate again. Call (725) 220-0280 and we’ll tell you if your post can be saved or should be replaced.
You can often repair a 1980s sliding gate, especially if the steel frame is still sound and only the track, rollers, or rack-and-pinion gear has failed. But if the frame is rusted through in multiple places or the operator is a brand with no available parts, a new gate and operator can be cheaper than three separate repair calls. We’ll inspect your gate, give you a repair price and a replacement price side by side, and let you decide. That’s the no-hassle upfront pricing we do on every Whitney job.
Yes. Whitney falls under Clark County codes, not City of Las Vegas ordinances, so gate setback distances from the property line and maximum gate heights can differ from what your friend in Summerlin might be allowed to build. County enforcement here also checks for UL 325 entrapment protection on automatic gates more frequently in recent years. We’re familiar with those county-specific requirements and build every repair or retrofit to pass inspection. If you call, we’ll tell you what applies to your specific gate and how much it affects the cost.
We usually replace rusted hinges rather than repair them, because a hinge that has rusted through its pin or bearing has lost its structural integrity. A new adjustable hinge lets us correct the sag at the same time. If the gate panel itself is still galvanized or the rust is surface-level, we wire-brush, treat, and repaint it instead of replacing the whole panel. The repair cost is $180 – $350 in most Whitney cases, and we’ll quote it before starting.
When an operator trips the safety reversal and won’t close, it’s usually a misaligned photo eye, a bad edge sensor, or a loop detector that’s reading a false vehicle presence in Whitney’s shifting clay soil. We start by re-aiming the photocells and checking for cracked conduit or water in the sensor wiring. If the loop detector’s field has shifted, we re-cut the loop or adjust its sensitivity. Most of these calls are $150 – $250 and done in one visit. Call (725) 220-0280 to book a time, and we’ll show up with the test equipment to find it instead of guessing.
Contact Calder Gate Repair for Gate Service in Whitney
If your gate is grinding, sagging, stuck, or dead, call us now at (725) 220-0280. We answer live 24/7. You’ll get a trackable arrival time, a price in writing before we start, and a 365-day guarantee that says if the repair fails, we come back free. That’s how we work in Whitney, from the older east side to the newest subdivisions, and it’s how we’ve been doing it since 2009.
Written by Nico Alvarez, Owner at Calder Gate Repair Las Vegas, serving Whitney residents with gate repair, electric gate repair, and gate opener repair.