Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Las Vegas, NV
Weld and rust repair for gates in Las Vegas typically runs $150 to $500 depending on how far the corrosion has spread and whether structural welds need rebuilding. Most jobs are done in a single visit, and Calder Gate Repair Las Vegas gives you a written price before any torch is lit. If your gate has rust blooming along the bottom rail, cracked welds at the hinge mounts, or sagging that worsens every month, this is the fix that stops it from becoming a full gate replacement. Call (725) 220-0280 and a live person answers, day or night.
We’re the dedicated Gate Repair specialist serving Las Vegas and every neighborhood around it, from Summerlin to Henderson to North Las Vegas. Welding and rust remediation is one of the repairs we do most often here because the desert is harder on metal than people expect. It’s not the rain. It’s the irrigation overspray, the pool chemicals in the air, and the summer heat cycling metal through 40-degree temperature swings every single day. We see the results of that cycle on gate frames all over the valley.
This page covers what weld and rust repair actually involves, what it costs in Las Vegas, and how we handle it differently. Nico Alvarez runs our Las Vegas operation, and every repair we do carries the same three written guarantees: a price before we start, a written guarantee on the work, and a free second visit if the repair fails within 365 days.
When You Need Weld & Rust Repair
Not every rust spot means you need a welder. Some surface rust is cosmetic and can be treated and sealed. But structural rust and broken welds are a different story. When the metal that holds your gate square starts failing, the gate gets harder to open, the opener motor strains, and eventually something snaps. Here’s what we typically see on service calls across Las Vegas:
- Rust blisters along the bottom rail – The bottom rail sits closest to sprinkler overspray and standing water after monsoon storms. In neighborhoods like Green Valley and Summerlin where landscaping runs right up to the gate, we regularly find the bottom rail rusted through from the inside while the outside still looks passable.
- Cracked or broken welds at the hinge mounts – The hinge is where all the gate’s weight concentrates. When those weld joints fatigue, the gate starts to sag on the latch side. You’ll see a gap at the top latch that slowly widens, or the gate dragging across the concrete.
- The gate no longer closes square – If the frame has twisted or a corner joint has separated, the gate binds against the post. The opener keeps pushing, the motor overheats, and eventually the control board fails. Weld repair is usually cheaper than replacing the opener.
- Rust-through on ornamental ironwork – Las Vegas has thousands of custom ornamental gates. The scrollwork and pickets are beautiful when new, but the thin gauge metal rusts fast once the powder coat is scratched. We cut out the bad section and weld in new material, then finish it to match.
- Sagging cantilever or slide gates – Slide gates carry a lot of weight on their rollers. When the internal frame members rust or crack, the gate starts to wobble on the track. Weld reinforcement buys you years before replacement becomes necessary.
- Previous patch jobs failing – We see a lot of gates that were “fixed” by someone who welded over rust instead of cutting it out. Rust never actually stops unless you remove it to clean metal. Those patch jobs fail, usually within a year. Ours don’t, and the 365-Day Done Right Promise backs that up.
If you’re noticing any of these, don’t wait. A gate that’s already sagging puts extra load on its opener every single cycle. The opener repair on top of the weld work costs more than catching it early. If you’re not sure whether what you’re seeing is structural or just cosmetic, call (725) 220-0280 and describe it. We’ll tell you honestly whether it needs a welder or a wire brush and some sealer.
Our Weld & Rust Repair Process
We don’t do drive-by quotes. Every weld and rust repair starts with eyes on the gate, a straight answer about what’s actually wrong, and a written number before we touch anything. Here’s the step-by-step:
- On-site assessment – Our technician arrives in uniform at a live, trackable appointment time, not a four-hour window. We inspect the entire gate: frame, hinges, pickets, rollers, and the opener mount points. We photograph everything.
- Written price, no surprises – You get a written quote before any work begins. It breaks down the weld labor, the rust treatment, any replacement steel needed, and the finish work. The number on the invoice matches the number we agreed to at the door.
- Rust removal to clean metal – We grind or cut out every bit of compromised metal. You can’t weld over rust and expect it to hold. This is the step that separates a repair that lasts from one that fails in a year.
- Structural welding and reinforcement – We weld the joints, add gussets or plate where the design allows, and make sure the gate sits square and moves freely before we consider the structural work done. We’re factory-familiar with gate hardware from Viking, BFT, and Linear, so we know how the frame needs to sit for the opener to work correctly.
- Rust treatment and finish – We treat the repaired area with a rust converter and inhibitor, then prime and finish to match the existing gate as closely as possible. The goal is a repair that doesn’t announce itself from ten feet away.
- Final test and digital invoice – We run the gate through full open and close cycles, verify the opener isn’t straining, and send you before-and-after photos along with a digital invoice you can pay from your phone. Every job includes the 365-Day Done Right Promise in writing.
That process is what we call the Relay Standard: live arrival time, before-and-after photos, digital invoice, and a real person on the phone if anything comes up later. It’s how every Gate Repair in Las Vegas job runs from booking to final test.
Weld & Rust Repair Pricing in Las Vegas
Most weld and rust repair jobs in Las Vegas land between $150 and $500. Small jobs, like a single cracked weld or a small rust patch with an hour or two of labor, fall on the lower end. Gates with extensive rust through multiple frame members, or jobs that require cutting out and replacing large sections of steel, run higher. You’ll always know the number before we start, because that’s a non-negotiable for every job we do.
Here’s what typical pricing looks like for the work we do around the valley:
| Repair Type | Typical Range in Las Vegas |
|---|---|
| Single broken weld repair | $150 – $250 |
| Multiple weld repairs with realignment | $250 – $450 |
| Rust section cut-out and patch weld (small) | $200 – $350 |
| Rust section cut-out and patch weld (large) | $350 – $600 |
| Full rust treatment and reseal (surface) | $175 – $400 |
| Structural reinforcement (gussets, plate, frame repair) | $300 – $700+ |
Four main things move the price. First, how much rust actually needs to come out. Surface rust is cheaper to fix than rust that’s eaten through the wall thickness of the tubing. Second, whether we’re welding in place or removing the gate to a bench. Heavier gates that need to be un-hung and laid flat for proper welding take more labor. Third, the finish work. If your gate is an older installation with a custom powder coat, matching the finish takes extra steps. Fourth, whether the opener needs adjustment after the gate’s geometry changes. Ghost Controls and other swing-arm openers sometimes need gate realignment and re-tuning once the gate sits square again.
Every weld and rust repair includes a written price, the written 365-Day Done Right Promise, and a free second visit if the repair fails. Call (725) 220-0280 for a free estimate. We’ll come out, assess the damage, and put the number in writing. No pressure, no surprises.
FAQs – Weld & Rust Repair
How much does weld and rust repair cost in Las Vegas?
Most weld and rust repair jobs in Las Vegas range from $150 to $500, with larger structural repairs running higher depending on materials and labor. A single broken weld usually costs $150 to $250, while extensive rust removal and frame reinforcement can reach $700 or more. Every Calder Gate Repair Las Vegas quote is written and free, so call (725) 220-0280 and you’ll know the exact number before any automatic gate repair work begins.
Is it cheaper to repair or replace a rusted gate?
Repair is almost always cheaper than replacement when the damage is localized to specific welds or rust sections. A full gate replacement in Las Vegas commonly runs $1,500 to $4,000 or more, depending on size and material. Most rust and weld failures we see can be cut out and rebuilt for a fraction of that. Replacement becomes the better option only when the rust has compromised the majority of the frame or the gate has already been patched multiple times. We’ll tell you straight which path makes sense for your gate.
Can you fix my gate the same day?
In many cases, yes. Single broken welds and small rust patches are one-visit repairs, and we stock common steel stock and rust treatment materials on our trucks. Larger jobs that require removing the gate or fabricating significant replacement sections may need a return visit. Call (725) 220-0280, describe what you’re seeing, and we’ll give you a realistic timeline. A live person answers 24/7.
Does rust on a gate get worse in Las Vegas?
Yes, and it gets worse faster than most people expect. Las Vegas irrigation water is mineral-heavy and significantly more corrosive to steel than rainwater, so gates near sprinkler systems show accelerated rusting at the bottom rail. Summer heat also speeds up the oxidation reaction. Once the powder coat is breached, rust spreads under the coating even when the surface looks mostly intact. The fix is cutting back to clean metal, treating it, and resealing, which is exactly what our rust repair process does.
What if the weld breaks again?
If the weld or rust repair fails within 365 days, we come back at no charge and make it right. That’s the Calder Gate Repair 365-Day Done Right Promise, and it’s written on every invoice. No fine print, no prorating. If the repair isn’t right, we fix it. That guarantee is why Las Vegas homeowners call us first for structural gate work.
Whether your gate is a modern steel frame running a BFT or Linear opener, or an older ornamental iron gate that’s been part of the house for twenty years, we treat the metal work the same way: cut out the bad, weld in the good, and stand behind it in writing. Call (725) 220-0280 for your free estimate, or use the form on our home page and we’ll call you right back.
Written by Nico Alvarez, Owner at Calder Gate Repair Las Vegas, serving Las Vegas.