Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Las Vegas Homeowners
A gate that won’t open, sags on its hinges, or slams shut unexpectedly is more than a nuisance. It’s a security gap, a curb-appeal problem, and sometimes a safety hazard. Calder Gate Repair Las Vegas fixes all of it, usually the same day you call. We’re the dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009, and led here in Las Vegas by Nico Alvarez. Every job starts with a written price before any work begins and ends with our 365-Day Done Right Promise in writing. If a repair fails within a year, we return free of charge. Call (725) 220-0280 and a live person answers, 24/7.
Driveway Gate Repair
Driveway Gate Repair is the work of restoring a residential gate to smooth, reliable operation, whether it’s sliding, swinging, or cantilevered. You need it when the gate groans, binds, stops mid-travel, or refuses to respond to a remote. In Las Vegas, heat and blowing dust shorten the life of rollers, hinges, and circuit boards faster than in milder climates. Calder Gate Repair Las Vegas diagnoses the fault on the spot, quotes a written price, and typically completes most repairs within one to two hours. Expect to pay roughly $180 to $340 for common opener and mechanical fixes before parts; heavier structural work like gate realignment, hinge replacements, or rail repairs runs $350 to $650.
Repairing Your Gate, Not Replacing It
We save gates whenever possible. Most Driveway Gate Repair calls in Las Vegas involve a failing opener, a bent bracket, or a wheel that’s worn flat on one side, all repairable for far less than a new installation.
Weather and Wear in the Vegas Valley
Summer heat bakes plastic gears brittle and monsoon-season dust cakes onto photo-eye sensors. We factor local conditions into every repair we make, which is why we inspect the full travel path, not just the part that failed.
Styles & brands we work with
Gate Welding
Gate Welding is the process of fusing cracked or broken metal components back into one structurally sound piece, often on steel or iron gates. You need it when a hinge tears away from the post, a picket snaps at the base, or a sagging corner has finally separated. Calder Gate Repair Las Vegas handles on-site welding for most residential and light commercial gates, using portable MIG and stick equipment suited to the job. Pricing for Gate Welding typically starts around $150 for a single crack or broken joint and runs up to $450 when multiple welds, reinforcement plates, or post repairs are required. We quote by the specific repair, never by the hour.
When a Grind-and-Refinish Is Needed
Most welds in Las Vegas require a quick grind, prime, and touch-up paint afterward so the repair area doesn’t flash rust. We include that in the written quote, because a bare weld exposed to desert heat and occasional rain won’t last.
Post and Hinge Integrity
A cracked weld is often the symptom of a failing post or a hinge that’s been underbuilt from day one. We check the surrounding metal before welding so the same crack doesn’t reappear six months later.
Commercial Gate Repair
Automatic gate repair covers the sliding, swing, and barrier gates used at apartment complexes, HOAs, warehouses, and business parks across Las Vegas. You need it when an access gate stops cycling, a keypad stops accepting codes, or a vehicle loop detector fails and the gate sits open or closed at the wrong time. Calder Gate Repair Las Vegas services commercial operators from Viking, Linear, BFT, DoorKing, and others, and we understand that a down gate in a Class-A office park in Summerlin is different from one at a distribution center near Nellis AFB. Commercial Gate Repair typically runs $250 to $800 depending on the operator type, access control integration, and parts required. We keep common commercial boards and safety edges in local stock.
Access Control Ties
When a commercial gate won’t respond, the opener is often fine; the problem sits in the keypad, card reader, or loop detector feeding it. We test the whole chain before replacing any component, which keeps your repair bill honest and low.
Minimizing Tenant Downtime
We schedule commercial Gate Repair calls with the property manager’s timeline in mind, arrive in uniform, and produce a digital invoice you can forward straight to accounting. No paperwork pileup, no vague phone updates.
Iron Gate Repair
Iron Gate Repair addresses the specific damage patterns of ornamental iron gates, from bent scrollwork to rusted-through bottom rails to hinges that have seized after years of neglect. You need it when the gate no longer closes square, when rust flakes off at a touch, or when a decorative element has cracked loose. Calder Gate Repair Las Vegas offers on-site iron work including straightening, welding, rust treatment, and repainting. Minor Iron Gate Repair such as a single hinge replacement or a small weld runs $150 to $300; more involved rebuilds with multiple pickets or a full bottom-rail replacement can reach $500 to $750. We write the price down before touching a bolt.
Rust Management in a Dry Climate
Las Vegas rust behaves differently than coastal rust. It’s slower, but once it starts, it spreads under the paint and hides until structural failure. We grind back to clean metal before any weld or paint, which is the only fix that holds.
Matching Your Gate’s Look
When we repair iron, we match the existing finish so the fix doesn’t scream at you from the curb. That includes texture, paint color, and even a little controlled patina on older pieces.
Sliding Gate Repair
Sliding Gate Repair is the specialized service for gates that roll or cantilever along a track, rail, or wheel system instead of swinging on hinges. You need it when the gate shudders, jumps its track, groans in the last few feet of travel, or strains against a bent V-track. In Las Vegas, sliding gates face a particular enemy: sand and grit grinding into rollers and bearings. Calder Gate Repair Las Vegas routinely replaces worn wheels, resurfaces rails, realigns chain drives, and tunes the operator. Most Sliding Gate Repair jobs land between $200 and $450, with full roller-and-track rebuilds on heavier gates reaching $600 to $900.
Track and Roller Wear
Roller wheels in Las Vegas wear flat in as little as two to three years, especially on unpaved or gravel driveways. We inspect the full set, not just the one that’s visibly failing, so you don’t pay for a second call in a month.
Cantilever Gate Experience
Cantilever gates carry their own repair profile: counterbalance issues, carriage bolts that loosen in wind, and warped guide frames. We’ve repaired enough of them in Spring Valley and Centennial Hills to know exactly what to check first.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is the craft-level service for gates built from traditional wrought iron or modern mild steel styled to look like it. You need it when a scroll has snapped, a finial has gone missing, or a bottom hinge has sagged so badly the gate drags a groove into your concrete. Calder Gate Repair Las Vegas handles Wrought Iron Gate Repair with a mix of structural welding and blacksmith-style metalwork, preserving the original design. Pricing typically runs $180 to $450 for most repairs; full restoration of heavily damaged or ornate pieces can reach $700 to $1,000. Every quote is written and agreed to before the work starts.
Repairing Ornamental Detail
Replacing a snapped scroll or missing spear tip takes more than a weld. It takes forming a matching piece, blending the finish, and making sure the repair is invisible from three feet. We do this work on-site whenever practical.
Sagging Gate Correction
Most wrought iron gate sag is a hinge and frame problem, not a welding problem. We reinforce the frame corner, re-weld or replace hinges, and adjust the reveal so the gate swings freely again.
Metal Gate Repair
Metal Gate Repair is the broad category covering steel, aluminum, and iron gates of all types, from simple chain-link walk gates to heavy automated driveway gates. You need it when metal has bent, cracked, corroded, or pulled loose from its mounting. Calder Gate Repair Las Vegas metalwork covers everything from re-welding a snapped frame joint to replacing a rusted post or straightening a bowed top rail. Basic Metal Gate Repair starts around $150 for small welds or hinge work; substantial repairs with new steel sections or post replacement run $400 to $800. We’ll tell you plainly if a gate is beyond saving and a replacement makes more financial sense.
Steel vs. Aluminum
Steel gates weld easily and hold repair well. Aluminum gates require a different process and skill set, and we bring both to every Metal Gate Repair call in Las Vegas. The wrong filler rod or heat setting ruins aluminum permanently.
Post Replacement Realities
When a post has rusted through at grade level, no amount of weld will save it. We cut, remove, and set a new post in concrete, then re-hang the gate. It’s a half-day job in most Las Vegas yards and we quote it as a flat price.
Wood Gate Repair
Wood Gate Repair focuses on the cedar, redwood, and pressure-treated gates common in Las Vegas neighborhoods like Aliante and Winchester. You need it when the gate has dropped because screws stripped out, when a slat has split in the dry heat, or when rot has started at the bottom rail. Calder Gate Repair Las Vegas handles Wood Gate Repair including frame rebuilds, slat replacement, hinge upgrades, and sag correction with anti-sag kits or steel frames. Most wood gate repairs run $180 to $400 depending on the extent of the damage and the wood species. We quote a written flat price, never hourly.
Heat, Dryness, and Wood Movement
Las Vegas’s single-digit humidity pulls moisture out of wood fast, which loosens screws and opens joints that would hold elsewhere. We use longer fasteners and, where appropriate, add corner brackets so the repair outlasts the original build.
Rot and Bottom Rail Failure
Even in the desert, drip irrigation and rare downpours put water right at the bottom rail. We replace rotted rails with pressure-treated stock or steel, then seal the cut ends before reinstalling slats.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Calder Gate Repair Las Vegas is factory-familiar with the opener brands homeowners and HOAs actually have on their properties. On LiftMaster units, we see a steady stream of logic-board failures caused by power surges during summer monsoon storms. We keep common LiftMaster boards, remotes, and safety sensors on our trucks. On Viking commercial operators, we work frequently on vehicular loop detectors and limit-switch drift, and we stock Viking-compatible components for fast turnaround on apartment gates in Summerlin and Southern Highlands.
BFT operators are popular on newer Las Vegas builds, and we’re familiar with their encoder-based programming and the subtle reset procedures that differ by model year. On Ghost Controls and Mighty Mule systems, which power many DIY-installed gates across the Valley, we regularly fix alignment issues, failed remotes, and premature motor wear. Whether your opener is a Linear, DoorKing, FAAC, Elite, or any other make, we can help. If we can’t identify the brand on the phone, our technician will identify it on site and still quote your repair before starting work.
Signs You Need a Pro Right Now
- The gate stops halfway and reverses. This usually means an obstruction sensor or a failing limit switch, the small sensor that tells the gate when to stop. Left alone, the opener can overheat and burn out, turning a $200 repair into a $900 replacement.
- The gate scrapes or drags on the ground. A gate that’s grinding concrete is telling you a hinge or wheel is worn out. Continuing to use it strips gears inside the opener and grooves your driveway permanently.
- The gate shudders or lurches during travel. This can mean a chain that’s jumped a sprocket, a wheel that’s out of round, or a bent rail. The extra strain shortens the life of every component it touches.
- The opener hums but nothing moves. A humming motor with zero gate movement indicates a stripped plastic gear or a broken drive coupling. This is a 30-minute fix for us and a one-hour job for most pros, but it requires opening the operator housing safely.
- You hear a loud bang or snap, then the gate swings loose. A snapped hinge or weld means the gate is now a hazard to anyone nearby, especially in the afternoon winds that sweep through Paradise and Sunrise Manor. Secure the gate and call us; we’ll dispatch same day.
Our Process, Step by Step
- 1
You call, a live person answers. At any hour, including 2 a.m. when a gate has failed and the property sits open. We take your address, ask a few targeted questions about the symptom and brand, and schedule a window that works.
- 2
You get a trackable arrival time. We send a link to your phone that shows your technician’s live position and estimated ETA. No four-hour “sometime between noon and four” waiting game, ever.
- 3
The technician diagnoses and writes the price down. Nico’s team arrives in uniform, inspects the gate and opener, and explains what went wrong in plain language. You get a written flat price for the repair before any work starts. If you decline, you owe nothing.
- 4
The repair happens, photographed start to finish. We document the work with before and after photos so you can see exactly what was replaced and why. Parts and labor are covered under the 365-Day Done Right Promise in writing.
- 5
You pay from a digital invoice. The invoice arrives by text or email with a secure payment link. No paper, no surprise charges, and a clear written record of the guarantee on your specific repair.
That’s The Relay Standard, named for the Relay Home Co. family we belong to. It’s how every Calder Gate Repair Las Vegas job runs, from a simple remote replacement in Whitney to a full commercial operator rebuild in North Las Vegas.
How Much Does Gate Repair Cost in Las Vegas?
Gate repair pricing in Las Vegas depends on the type of gate, the opener brand, and the failure mode. Most residential opener repairs run $180 to $340 before parts. Mechanical repairs such as roller, wheel, and hinge replacements typically land between $200 and $450. Welding and structural work starts around $150 for a single crack and reaches $750 for substantial reinforcement or post replacement. Commercial gate repair typically runs $250 to $800 depending on operator complexity and access control integration.
Three factors move the price most. First, the part: a basic photocell sensor costs far less than a swing-arm operator circuit board, and yes, some boards for high-end brands can approach $400 alone. Second, the access condition: gates tucked behind shrubs or built into hillside properties in Aliante take longer to work on. Third, the gate’s overall condition: a well-maintained gate with recent hinges costs less to repair than one that’s been ignored for years and has multiple compounding failures.
How to avoid overpaying: get a written flat price before work begins, which we do on every single job. Beware quotes given over the phone that balloon after “discovery.” We diagnose in person, quote the full job, and the number on the invoice matches the number on the written estimate. No surprises. Your free estimate includes the diagnosis, the written price, and our recommendations, whether you hire us or not. Call (725) 220-0280 for your exact quote.
Our Service Area Near Las Vegas
Calder Gate Repair Las Vegas services the entire Valley, from Gate Repair in Summerlin to Gate Repair in Southern Highlands, plus Centennial Hills, Spring Valley, North Las Vegas, Sunrise Manor, Paradise, Whitney, Winchester, and Aliante. We also handle calls near Nellis AFB and throughout the surrounding communities. Typical response times run 60 to 90 minutes for urgent calls, and same-day slots are available most days of the week. If you’re somewhere else in the greater Las Vegas area, Gate Repair in Las Vegas covers it, and calling (725) 220-0280 is the fastest way to confirm availability in your neighborhood.
Serving Las Vegas, NV - Our Local Coverage Area
We’re based in the Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Las Vegas
Gate repair is the process of diagnosing and fixing a gate that won’t open, close, lock, or operate smoothly. It covers the mechanical parts, such as hinges, rollers, wheels, tracks, and frames, plus the electrical parts, such as openers, circuit boards, sensors, keypads, and locks. Calder Gate Repair Las Vegas handles both mechanical and electrical repairs on every call so you don’t need separate contractors.
Most residential gate repairs take between one and two hours on site, assuming parts are available. Common jobs like a stripped gear, a worn roller, or a misaligned sensor are usually done within the hour. Structural repairs with welding, concrete work, or multiple components can take half a day. We confirm the time frame in your written quote before starting.
Most gate repairs in Las Vegas run between $180 and $450, with structural work like welding or post replacement reaching $750 or more on larger gates. Commercial operator repairs typically land between $250 and $800 depending on the brand and access control components. Your exact price is always written down and agreed to before the first bolt is turned. Call (725) 220-0280 for a free, no-obligation estimate.
Yes. Our technicians are factory-familiar with LiftMaster residential and commercial openers, plus Viking, BFT, Linear, FAAC, DoorKing, Elite, Ghost Controls, and Mighty Mule. We keep common boards, remotes, and safety components in stock for faster repairs. If you tell us the brand on the phone, we can often bring the likely part with us on the first trip.
Yes. We offer same-day service across Las Vegas and answer calls live 24/7, so you don’t have to leave a message and wait. Emergency calls are prioritized for gates that are stuck open, stuck closed, or otherwise compromising security. Call (725) 220-0280 and we’ll give you a real arrival window, not a vague promise.
Every repair we make includes the 365-Day Done Right Promise in writing. If a repair fails within 365 days for any reason related to the work we performed, Calder Gate Repair Las Vegas returns and fixes it at no charge. No deductibles, no fine print, no “it depends.” The guarantee is stated on every invoice and covers both parts and labor on the repair we made.
Clear the area around the gate so our technician has room to work, and move any vehicles that block access to the gate’s path. If you have a keypad or remote that’s failing, have it available for testing. That’s it. We handle the diagnosis, the written price, and the repair from there. No special tools or knowledge needed from you, just a phone and a gate that needs fixing.
Schedule Your Gate Repair Service in Las Vegas Today
A broken gate isn’t something to put off, not in a city where heat and wind turn small problems into big ones fast. Call (725) 220-0280 now and get a live person, a written price before any work starts, and the 365-Day Done Right Promise on every repair. Your estimate is free, your appointment is trackable, and your gate gets done right the first time.
Written by Nico Alvarez, Owner at Calder Gate Repair Las Vegas.