Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunrise Manor, NV
Gate repair in Sunrise Manor, NV usually costs between $180 and $680 depending on whether it’s a chain, hinge, opener, or full operator swap. Most jobs are done the same day, and a technician from Calder Gate Repair can be at your door with a written price before any work begins. Sunrise Manor’s mix of 1960s-1980s homes and newer stucco properties means we see everything from rusted iron swing gates to solar-powered openers cracked by the desert sun. Call (725) 220-0280 and a live person answers, 24/7.
Why Sunrise Manor Homes Are Different
Sunrise Manor sits on the east side of the valley, where summers regularly push past 110°F and monsoon storms blow in fast. That heat and dust combination is hard on gates. Paint fades and chalks, steel expands and warps, plastic limit-switch housings turn brittle, and the fine dust that rides in with monsoon wind clogs slide tracks and chain drives. On older homes, many gates from the 1970s sit on unshaded south-facing lots. Those get full sun from late morning to early evening, so solar panels crack, epoxy anchors loosen from daily thermal cycling, and welded hinges that were set directly into concrete without corrosion protection start to flake and seize.
The housing stock matters too. Sunrise Manor is dominated by single-family detached homes, many with original ornamental iron or chain-link gates. Those older gates are usually heavier than what you’d find in a newer subdivision, and the posts were often set without the sealing and protective coatings we’d use today. Newer stucco-clad properties tend to have lighter tubular steel or aluminum gates, but those come with their own issues: aluminum gates bend more easily when a wind gust catches them, and the lighter frames put more stress on opener arms and hinges. No two Sunrise Manor gates wear the same way, which is why we inspect the whole system, not just the part that stopped moving.
Styles & brands we work with
Our Main Sunrise Manor Services
Most Sunrise Manor calls fall into three categories: a gate that will not open or close, an electric system that has stopped responding, or an opener that runs but cannot move the gate. Each has its own page below.
Gate Repair in Sunrise Manor
Sunrise Manor’s older gates fail in predictable ways: sagging hinges, cracked welds, bent posts, and rust where the gate meets the ground. We repair swing and sliding gates, re-weld broken joints, replace rusted hardware, and true up gates that have dropped out of square. On a 1970s ornamental iron gate with a south-facing exposure, we often find the bottom rail rusted through while the top is still solid. Read more on our Gate Repair in Sunrise Manor page.
Electric Gate Repair in Sunrise Manor
Electric gates in Sunrise Manor deal with heat, dust, and sudden rain, all of which stress wiring, control boards, and safety sensors. We troubleshoot dead keypads, shorted photo eyes, failed safety edges, and power issues between the panel and the operator. Monsoon-season dust is a repeat offender: it coats the inside of junction boxes and causes intermittent short circuits that are easy to misdiagnose if you’re not looking for them. Details are on the Electric Gate Repair in Sunrise Manor page.
Gate Opener Repair in Sunrise Manor
When an opener runs but the gate won’t move, or the opener just hums, the cause is usually a failed capacitor, stripped gear, or broken chain or belt. We work on LiftMaster, FAAC, BFT, and Mighty Mule openers, among others, and we stock common replacement parts in our Las Vegas area vans so most repairs don’t wait on shipping. Because Sunrise Manor sees so much UV, we also check for cracked housings and heat-damaged circuit boards. See Gate Opener Repair in Sunrise Manor for specifics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sunrise Manor
Our technicians are factory-familiar with nine major opener brands, and on Sunrise Manor jobs we most often work on LiftMaster, FAAC, Mighty Mule, and BFT units. We keep common boards, remotes, and safety parts close by for these brands, which usually means a one-trip fix. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunrise Manor, NV
| Service | Typical range in Sunrise Manor |
|---|---|
| Gate opener repair | $180 – $380 before parts |
| Electric gate repair | $220 – $480 before parts |
| Hinge replacement (welded or bolted) | $140 – $320 per hinge |
| Gate welding repair | $120 – $300 per repair point |
| Track realignment for sliding gates | $160 – $280 |
| Chain or belt replacement | $150 – $260 before parts |
| Limit switch replacement | $120 – $220 before parts |
| Keypad or intercom replacement | $180 – $340 before parts |
| Full gate opener swap (operator only) | $450 – $680 before parts |
Sunrise Manor prices run higher when a gate is badly rusted, posts have shifted, or the opener is an older model with parts that are harder to source. Whatever the job, you get a written price before any work starts, and the number on the invoice is the number we agreed to at the door.
Neighborhoods We Serve in Sunrise Manor
We cover the full Sunrise Manor area, from the older blocks near Nellis Boulevard and Owens Avenue up through the newer subdivisions further east. Our typical response time across Sunrise Manor is 60 to 90 minutes for emergency calls, and we schedule routine work in the same window.
- East Sunrise Manor
- Hollywood Boulevard corridor
- Nellis and Owens area
- Charleston Heights boundary blocks
- Lake Mead Boulevard corridor
Service Area – Cities Near Sunrise Manor
Calder Gate Repair dispatches from the Las Vegas office and serves Sunrise Manor locally. When a job takes us past the Sunrise Manor line, we also cover Las Vegas, NV, Summerlin, NV, Southern Highlands, NV, and Aliante, NV.
Serving Sunrise Manor, NV - Our Local Coverage Area
We’re based in the Sunrise Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise Manor
For emergencies, our typical response time in Sunrise Manor is 60 to 90 minutes. You’ll see a live, trackable arrival time before the technician leaves, not a four-hour window. Routine work is scheduled around your availability, and we call or text with updates. Call (725) 220-0280 to book a visit.
In most Sunrise Manor neighborhoods, repairing an existing gate does not require a permit, but some HOAs have rules about gate style, color, and finish, especially in newer subdivisions. We’ll note any HOA concerns on site, and if your HOA has a specific finish requirement we’ll match it before welding or repainting. The price is in writing before we start.
Yes, and it’s one of the more common calls we take in Sunrise Manor. Gates from the 1960s through the 1980s often have welded hinges and posts set directly in concrete. We repair what’s repairable and tell you straight when a full gate or post replacement is the better long-term move. Every repair carries a 365-Day Done Right Promise: if it fails within a year, we return at no charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Manor Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Solid work. ETA slipped by fifteen minutes, but I got a text."
- Holly B."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.